Introduction
The AMS S3 Glass Front VRM Vending Machine combines sleek aesthetics with high functionality, offering customizable trays and advanced diagnostics for seamless operation. It is designed to vend snacks, beverages, and other packaged items while maintaining energy efficiency and user convenience.
Specifications
| Specification | Details |
| Dimensions | Height: 72", Width: 39", Depth: 34" |
| Weight | ~850 lbs. |
| Power Supply | 115V or 230V, 50/60 Hz |
| Refrigeration | Factory-sealed R290 refrigerant unit |
| Selections | Configurable for snacks and drinks |
Key Features
- Glass Front Display: Provides visibility for products, improving customer engagement.
- SENSIT Product Detection: Ensures successful product delivery.
- Customizable Trays: Flexible configurations accommodate various product sizes.
- Advanced Diagnostics: Built-in error monitoring simplifies troubleshooting.
- Energy-Efficient Cooling: Maintains optimal temperature while conserving energy.
Installation
Placement Guidelines
- Install the machine on a stable, level surface capable of supporting at least 1,200 lbs.
- Maintain proper clearances for ventilation:
Electrical Connection
- Plug into a grounded outlet matching the machine's voltage requirements (115V or 230V).
- Use a dedicated circuit to prevent power fluctuations.
Initial Setup
- Power on the machine and perform a diagnostic test via the VMC (Vending Machine Controller).
- Calibrate the SENSIT detection system for accurate product delivery monitoring.
Operation
Loading Products
- Unlock and open the front door.
- Pull out the trays to access product slots.
- Place snacks and beverages securely in the coil spirals or columns, ensuring proper alignment.
- Test vend each selection to confirm smooth operation.
Programming Prices
- Enter the control board menu via the keypad.
- Navigate to Price Setup.
- Assign prices to individual selections or set global pricing.
- Save changes and exit the menu.
Customer Interaction
- Customers select products using the keypad.
- The LED display guides them through the transaction process, showing product prices and vending status.
Maintenance
Daily Maintenance
- Clean the glass front and external panels using a soft, damp cloth.
- Inspect the coin and bill acceptors for jams or debris.
Weekly Maintenance
- Clean condenser coils to ensure efficient refrigeration.
- Verify proper tray alignment and test vending motors.
Monthly Maintenance
- Inspect wiring and connections for wear or damage.
- Perform a system diagnostic using the control panel.
Troubleshooting
| Issue | Possible Cause | Solution |
| Product not vending | Misaligned product or coil jam | Adjust product alignment or clear jam. |
| Machine not cooling | Dirty condenser or fan failure | Clean the condenser or replace the fan. |
| SENSIT detection failing | Misaligned sensor | Recalibrate the SENSIT system. |
| Display not functioning | Loose wiring or power issue | Check and secure connections. |
Contact Information
For technical support, sales, or service inquiries, contact:
- Phone: 304.725.6921
- Fax: 304.725.6983
- Email: [email protected]
For additional resources, visit the AMS Manuals Page.
For immediate assistance, contact AMS Customer Support using the details above.