Introduction
The AMS S3 MicroVend vending machine is tailored for vending small products such as electronics, personal items, and specialty goods. Its compact design, advanced Sensit technology, and energy-efficient operation make it an ideal solution for offices, retail, and other limited-space environments.
Specifications
| Specification | Details |
| Dimensions | Height: 36", Width: 21", Depth: 21" |
| Weight | ~250 lbs. |
| Power Supply | 115V or 230V, 50/60 Hz |
| Technology | Sensit product detection system |
| Selections | Configurable trays for small items |
Key Features
- Compact Design: Ideal for small spaces while maintaining high vending capacity.
- Sensit Detection Technology: Ensures accurate product delivery with minimal errors.
- Customizable Trays: Supports flexible configurations to accommodate various product types.
- Energy-Efficient Operation: Designed for cost-effective, long-term usage.
- User-Friendly Interface: Includes a bright LED display and responsive keypad.
Installation
Placement Guidelines
- Place the machine on a stable, level surface.
- Maintain proper ventilation:
Electrical Connection
- Plug the machine into a grounded outlet with the appropriate voltage (115V or 230V).
- Avoid shared circuits or extension cords.
Initial Setup
- Power on the machine and access the service menu.
- Calibrate the Sensit detection system for accurate operation.
- Perform a diagnostic check to ensure all components are functional.
Operation
Loading Products
- Unlock and open the front door.
- Pull out trays to access the product slots.
- Place items securely within the coil spirals or compartments, ensuring proper alignment.
- Test vend each selection to confirm proper operation.
Programming Prices
- Access the service menu via the VMC (Vending Machine Controller).
- Navigate to Price Setup.
- Assign individual or bulk pricing for all selections.
- Save settings and exit the menu.
Customer Interaction
- Customers use the keypad to select products.
- The LED display provides pricing, instructions, and vending status updates.
Maintenance
Daily Maintenance
- Clean the glass and exterior surfaces with a damp, soft cloth.
- Inspect coin and bill acceptors for jams or debris.
Weekly Maintenance
- Test the Sensit detection system and recalibrate if necessary.
- Ensure proper alignment of trays and verify motor functionality.
Monthly Maintenance
- Clean the condenser coils to maintain energy-efficient cooling.
- Inspect all wiring and connectors for wear or damage.
Troubleshooting
| Issue | Possible Cause | Solution |
| Product not vending | Misaligned product or coil jam | Adjust product placement or clear jam. |
| Machine not powering on | Faulty wiring or power supply | Verify connections and ensure proper voltage. |
| Sensit detection failing | Sensor miscalibration | Recalibrate or clean the sensor. |
| Incorrect change dispensed | Coin mechanism error | Reset or replace the coin mechanism. |
Contact Information
For technical support, sales, or service inquiries, contact:
- Phone: 304.725.6921
- Fax: 304.725.6983
- Email: [email protected]
For additional resources, visit the AMS Manuals Page at www.amsvendors.com.
For immediate assistance, contact AMS Customer Support using the details above.