Introduction
The AMS Sensit 3 vending machine incorporates state-of-the-art Sensit technology to ensure accurate and dependable product delivery. Its energy-efficient refrigeration system and customizable trays make it a versatile choice for vending snacks, beverages, and more.
Specifications
| Specification | Details |
| Dimensions | Height: 72", Width: 39", Depth: 34" |
| Weight | ~850 lbs. |
| Power Supply | 115V or 230V, 50/60 Hz |
| Refrigeration | R290 sealed refrigerant unit |
| Technology | Sensit product detection system |
| Selections | Configurable for snacks and beverages |
Key Features
- Advanced Sensit Technology: Ensures reliable product delivery and minimizes vending errors.
- Customizable Tray Layouts: Supports various product sizes and types for flexible vending.
- Energy-Efficient Cooling: Maintains product freshness while reducing energy consumption.
- User-Friendly Interface: Bright LED display and responsive keypad simplify customer interactions.
- Robust Design: Engineered for high-traffic environments.
Installation
Placement Guidelines
- Place the machine on a stable, level surface capable of supporting at least 1,200 lbs.
- Maintain proper ventilation:
Electrical Connection
- Connect to a grounded outlet matching the voltage requirement (115V or 230V).
- Avoid using power strips or shared circuits.
Initial Setup
- Power on the machine.
- Access the service menu and calibrate the Sensit detection system for accurate operation.
- Perform a diagnostic test via the VMC (Vending Machine Controller) to verify functionality.
Operation
Loading Products
- Open the front door with the service key.
- Pull out trays to access the product slots.
- Load snacks, beverages, or other items securely into the coil spirals or columns.
- Test vend each selection to confirm smooth operation.
Programming Prices
- Enter the service menu on the control board.
- Navigate to Price Setup.
- Assign individual prices or set a global price for all selections.
- Save and exit the menu.
Customer Interaction
- Customers use the keypad to make selections.
- The LED display provides pricing information and vending status updates.
Maintenance
Daily Maintenance
- Wipe down the exterior panels and glass using a damp, soft cloth.
- Inspect the coin and bill acceptors for jams or debris.
Weekly Maintenance
- Clean the condenser coils and ventilation grilles for efficient cooling.
- Check tray alignment and ensure motors function properly.
Monthly Maintenance
- Inspect wiring and connectors for signs of wear or damage.
- Perform a full system diagnostic via the control board menu.
Troubleshooting
| Issue | Possible Cause | Solution |
| Product not vending | Misaligned product or coil jam | Adjust product placement or clear jam. |
| Machine not cooling | Dirty condenser or fan failure | Clean the condenser or replace the fan. |
| Sensit detection failing | Misaligned or dirty sensor | Recalibrate the Sensit system or clean the sensor. |
| Incorrect change dispensed | Coin mechanism error | Reset or replace the coin mechanism. |
Contact Information
For technical support, sales, or service inquiries, contact:
- Phone: 304.725.6921
- Fax: 304.725.6983
- Email: [email protected]
For additional resources, visit the AMS Manuals Page at www.amsvendors.com.
For immediate assistance, contact AMS Customer Support using the details above.