Introduction
The AMS Sensit II vending machine is a high-capacity, glass-front vendor that combines innovative Sensit product detection technology with energy-efficient cooling and flexible tray configurations. This guide helps operators set up, manage, and maintain the machine effectively.
Specifications
| Specification | Details |
| Dimensions | Height: 72", Width: 39", Depth: 34" |
| Weight | ~850 lbs. |
| Power Requirements | 115V or 230V, 50/60 Hz |
| Refrigeration | Factory-sealed R290 refrigerant system |
| Technology | Sensit product detection system |
| Selections | Configurable trays for snacks and beverages |
Key Features
- Sensit Product Detection: Verifies product delivery to minimize errors.
- Flexible Tray Configurations: Accommodates various product sizes and types.
- Energy-Efficient Cooling: Keeps products at optimal temperatures while conserving energy.
- User-Friendly Interface: Features an intuitive LED display and keypad for seamless operation.
- Durable Construction: Engineered for high-traffic environments.
Installation
Placement Guidelines
- Position the machine on a stable, level surface capable of supporting 1,200 lbs.
- Maintain proper clearances:
Electrical Connection
- Plug the machine into a grounded outlet matching the voltage requirements.
- Avoid using extension cords or shared circuits.
Initial Setup
- Power on the machine.
- Calibrate the Sensit detection system to ensure accurate monitoring of product drops.
- Perform a diagnostic check via the VMC (Vending Machine Controller) to verify functionality.
Operation
Loading Products
- Open the front door with the service key.
- Pull out trays to access the product slots.
- Load items securely in the coil spirals or columns, ensuring proper alignment for smooth vending.
- Push trays back into place and perform test vends to confirm correct operation.
Programming Prices
- Access the control menu via the keypad.
- Navigate to Price Setup.
- Set prices for individual selections or apply global pricing.
- Save and exit the menu.
Customer Interaction
- Customers select products using the keypad.
- The LED display guides them through the transaction process and confirms product delivery.
Maintenance
Daily Maintenance
- Wipe down the exterior surfaces and glass panels with a damp cloth.
- Inspect the coin and bill acceptors for debris or jams.
Weekly Maintenance
- Clean condenser coils to maintain refrigeration efficiency.
- Check tray alignment and ensure motors function correctly.
Monthly Maintenance
- Perform a full diagnostic test using the VMC menu.
- Inspect wiring and connections for wear or damage.
Troubleshooting
| Issue | Possible Cause | Solution |
| Product not vending | Misaligned product or coil jam | Adjust product alignment or clear jam. |
| Machine not cooling | Dirty condenser or fan failure | Clean condenser or replace fan. |
| Sensit system not detecting | Sensor miscalibration | Recalibrate the Sensit system. |
| Incorrect change dispensed | Coin mechanism error | Reset or replace the coin mechanism. |
Contact Information
For technical support, sales, or service inquiries, contact:
- Phone: 304.725.6921
- Fax: 304.725.6983
- Email: [email protected]
For additional resources, visit the AMS Manuals Page.
For immediate assistance, contact AMS Customer Support using the details above.