Introduction
The AMS Combination Vendor (Model L0188B) is designed to accommodate snacks, beverages, and other packaged products in one machine. With energy-efficient refrigeration, customizable trays, and advanced diagnostics, it provides reliable service in various environments.
Specifications
| Feature | Details |
| Dimensions | Height: 72", Width: 39", Depth: 34" |
| Weight | ~850 lbs. |
| Power Supply | 115V or 230V, 50/60 Hz |
| Refrigeration | R290 sealed refrigeration unit |
| Selections | Configurable trays for snacks and drinks |
Key Features
- Dual-Functionality: Supports both snacks and drinks in one machine.
- Energy-Efficient Refrigeration: Keeps beverages cool while maintaining energy savings.
- Customizable Trays: Adjustable for various product sizes and configurations.
- Advanced Diagnostics: Built-in error reporting and monitoring for easy maintenance.
Installation
Placement Guidelines
- Install on a stable, level surface capable of supporting at least 1,200 lbs.
- Maintain clearances for ventilation:
Electrical Connection
- Use a dedicated, grounded outlet that matches the voltage requirements (115V or 230V).
- Avoid using power strips or extension cords.
Refrigeration Setup
- Ensure that ventilation openings are unobstructed.
- Verify that the refrigeration unit operates correctly upon powering up.
Operation
Loading Products
- Open the machine’s door using the provided service key.
- Pull out the trays for easy access to product slots.
- Load snacks and beverages, ensuring proper alignment in the coil spirals or beverage columns.
- Test vend to confirm smooth operation.
Programming Prices
- Access the control board menu via the keypad.
- Navigate to the Price Setup option.
- Set prices for individual selections or apply bulk pricing.
- Save changes before exiting.
Customer Interaction
- Customers use the keypad to input selections.
- The LED display provides instructions and updates on transactions.
Maintenance
Daily Maintenance
- Wipe down the exterior with a damp cloth to remove dust and smudges.
- Inspect the coin mechanism and bill acceptor for jams or debris.
Weekly Maintenance
- Clean condenser coils to ensure efficient cooling.
- Verify the proper alignment of trays and test motors.
Monthly Maintenance
- Inspect all wiring and connections for wear.
- Perform a full diagnostic test using the VMC.
Troubleshooting
| Issue | Possible Cause | Solution |
| Product not vending | Misaligned product or coil jam | Adjust or clear the product jam. |
| Machine not cooling | Dirty condenser or fan failure | Clean the condenser or replace the fan. |
| Display not working | Loose wiring or power issue | Check and secure connections. |
| Incorrect change dispensed | Coin mechanism error | Reset or replace the coin mechanism. |
Contact Information
For technical support, sales, or service inquiries, contact:
- Phone: 304.725.6921
- Fax: 304.725.6983
- Email: [email protected]
For additional resources, visit the AMS Manuals Page.
For immediate assistance, contact AMS Customer Support using the details above.