Introduction
The AMS Epic Snack Vendor (Model L0190D) combines modern technology with high-capacity design to provide efficient and reliable vending solutions. With its advanced refrigeration system, customizable trays, and user-friendly interface, this machine is perfect for vending snacks, candy, and other small packaged products.
Specifications
| Specification | Details |
| Height | 72 inches |
| Width | 39 inches |
| Depth | 34 inches |
| Weight | ~850 lbs. |
| Electrical Requirements | 115V or 230V, 50/60 Hz |
| Selections | Configurable for snacks and small items |
| Refrigeration | Factory-sealed refrigeration unit |
Key Features
- High Capacity and Versatility: Supports various tray configurations for different product types.
- Energy-Efficient Design: Advanced refrigeration maintains product freshness while conserving energy.
- Enhanced User Interface: Bright LED display and touch-sensitive keypad for smooth operation.
- Advanced Diagnostics: Built-in monitoring for error detection and performance tracking.
Installation
Placement Guidelines
- Place the vending machine on a level, stable surface capable of supporting at least 1,200 lbs.
- Ensure proper clearance:
- Avoid placing the machine near heat sources or in high-humidity areas.
Electrical Setup
- Connect to a dedicated grounded outlet matching the voltage requirements (115V or 230V).
- Avoid using extension cords or power strips.
Initial Calibration
- Power on the machine and access the service menu.
- Perform a diagnostic check to ensure all systems are operational.
Operation
Product Loading
- Unlock and open the vending machine door.
- Slide out trays to load products.
- Place items securely within the coil spirals, ensuring proper alignment for smooth vending.
- Push trays back into position and perform test vends to confirm functionality.
Programming Prices
- Enter the service menu via the VMC (Vending Machine Controller).
- Navigate to Price Setup.
- Assign prices for individual selections or apply a bulk price to all products.
- Save changes before exiting.
Customer Interaction
- Customers select items using the keypad.
- The LED display guides users through the transaction process, showing price and selection status.
Maintenance
Daily Maintenance
- Clean the exterior panels and glass with a soft, damp cloth.
- Inspect the coin and bill acceptors for jams or debris.
Weekly Maintenance
- Clean the condenser coils and ventilation grilles.
- Check the trays and coils for proper alignment and smooth operation.
Monthly Maintenance
- Inspect electrical connections and test motors.
- Perform a full system diagnostic via the control panel.
Troubleshooting
| Issue | Possible Cause | Solution |
| Product not vending | Misaligned product or coil jam | Adjust product alignment or clear the jam. |
| Machine not cooling | Dirty condenser or faulty fan | Clean the condenser or replace the fan. |
| Display not working | Loose wiring or power failure | Check connections and verify power supply. |
| Incorrect change dispensed | Coin mechanism error | Inspect, reset, or replace the mechanism. |
Contact Information
For technical support, sales, or service inquiries, contact:
- Phone: 304.725.6921
- Fax: 304.725.6983
- Email: [email protected]
For additional resources, visit the AMS Manuals Page.
For immediate assistance, contact AMS Customer Support using the details above.