Introduction
The AMS MicroVend is a compact, efficient vending machine designed for small items, including electronics, personal products, and accessories. It features modular trays, advanced diagnostics, and a small footprint, making it ideal for offices, retail, and specialty environments.
Specifications
| Feature | Details |
| Dimensions | Height: 36", Width: 21", Depth: 21" |
| Weight | ~250 lbs. |
| Power Supply | 115V or 230V, 50/60 Hz |
| Capacity | Configurable trays for small items |
| Material | Durable steel construction |
Key Features
- Compact Design: Perfect for limited spaces while maintaining high vending capacity.
- Customizable Tray System: Configurable to accommodate various product sizes.
- Advanced Diagnostics: Built-in error detection for streamlined troubleshooting.
- Efficient Power Usage: Energy-efficient operation with minimal maintenance needs.
Installation
Placement Guidelines
- Install the machine on a flat, stable surface.
- Ensure clearance for ventilation:
Electrical Connection
- Use a dedicated outlet with the appropriate voltage (115V or 230V).
- Avoid shared circuits or extension cords.
Initial Setup
- Power on the machine and verify system initialization via the display panel.
- Perform a diagnostic check using the control board menu.
Operation
Loading Products
- Unlock and open the machine door.
- Pull out trays to access product slots.
- Position items securely within the coil spirals for consistent vending.
- Test vend after loading to ensure proper operation.
Programming Prices
- Access the control board menu.
- Navigate to the Price Setup section.
- Set individual or bulk pricing for all selections.
- Save settings before exiting.
Customer Interaction
- Customers select items via a keypad interface.
- The display panel provides instructions and updates.
Maintenance
Daily Maintenance
- Clean the display screen and exterior surfaces.
- Inspect the product delivery area for debris or blockages.
Weekly Maintenance
- Test the motors and sensors for proper operation.
- Ensure product alignment on trays.
Monthly Maintenance
- Inspect wiring connections for wear.
- Perform a full system diagnostic via the control board.
Troubleshooting
| Issue | Possible Cause | Solution |
| Product not vending | Misaligned product or coil jam | Adjust the product or clear the jam. |
| Machine not powering on | Faulty wiring or power supply | Check connections and verify outlet power. |
| Display not functioning | Loose connection | Reattach the wiring or replace the display. |
Contact Information
For technical support, sales, or service inquiries, contact:
- Phone: 304.725.6921
- Fax: 304.725.6983
- Email: [email protected]
For additional resources, visit the AMS Manuals Page.
For immediate assistance, contact AMS Customer Support using the details above.