Introduction
The AMS S3-FV vending machine is a high-performance solution designed for diverse vending needs. Featuring the advanced SENSIT product detection system, energy-efficient refrigeration, and flexible tray configurations, the S3-FV ensures a seamless user experience while simplifying operator tasks.
Specifications
| Feature | Details |
| Dimensions | Height: 72", Width: 39", Depth: 34" |
| Weight | ~850 lbs. |
| Power Supply | 115V or 230V, 50/60 Hz |
| Refrigeration | Factory-sealed R290 refrigerant unit |
| Selections | Configurable trays for snacks and drinks |
| Technology | SENSIT product detection system |
Key Features
- SENSIT Product Detection: Prevents vending errors by verifying product delivery.
- Energy-Efficient Cooling: Ensures optimal temperature for beverages with minimal power consumption.
- Customizable Trays: Allows adjustment for various product sizes and configurations.
- Advanced Diagnostics: Simplifies troubleshooting with built-in error codes and monitoring.
Installation
Placement Guidelines
- Place the machine on a stable, level surface capable of supporting at least 1,200 lbs.
- Maintain proper ventilation clearances:
Electrical Setup
- Plug into a grounded outlet matching the voltage requirements (115V or 230V).
- Use a dedicated circuit to avoid power fluctuations.
Refrigeration Setup
- Ensure all ventilation openings are clear and unobstructed.
- Power on the refrigeration unit and verify cooling performance.
Operation
Loading Products
- Open the vending machine door using the provided service key.
- Pull out trays to access the product slots.
- Load snacks and beverages, ensuring they are positioned securely in the coil spirals or columns.
- Test vend each selection to confirm smooth operation.
Programming Prices
- Access the VMC (Vending Machine Controller) menu.
- Navigate to Price Setup.
- Assign prices for individual selections or apply global pricing for all products.
- Save and exit the menu.
Customer Interaction
- Customers use the keypad to make selections.
- The LED display provides transaction status, instructions, and error messages.
Maintenance
Daily Maintenance
- Wipe down the exterior panels and display with a damp, soft cloth.
- Check the coin and bill acceptors for jams or debris.
Weekly Maintenance
- Clean condenser coils to maintain efficient refrigeration.
- Inspect trays for proper alignment and ensure motors function correctly.
Monthly Maintenance
- Perform a diagnostic check using the VMC menu.
- Inspect wiring and connectors for signs of wear or damage.
Troubleshooting
| Issue | Possible Cause | Solution |
| Product not vending | Misaligned product or coil jam | Adjust product alignment or clear jam. |
| Machine not cooling | Dirty condenser or fan failure | Clean the condenser or replace the fan. |
| SENSIT detection failing | Sensor misalignment | Recalibrate the SENSIT system. |
| Incorrect change dispensed | Coin mechanism error | Inspect, reset, or replace the mechanism. |
Contact Information
For technical support, sales, or service inquiries, contact:
- Phone: 304.725.6921
- Fax: 304.725.6983
- Email: [email protected]
For additional resources, visit the AMS Manuals Page.