Introduction
The AMS KLx Locker is a secure vending solution that enables the storage and dispensing of large or sensitive products. With advanced locking mechanisms, robust construction, and an intuitive control system, the KLx Locker ensures reliable performance across various environments.
Specifications
| Specification | Details |
| Dimensions | Height: 72”, Width: 39”, Depth: 34” |
| Weight | ~900 lbs. |
| Power Requirements | 115V/230V, 50/60 Hz |
| Locker Compartments | Configurable for multiple product sizes |
| Control System | Integrated with AMS control boards |
Key Features
- Secure Locking System: Each locker is electronically controlled, ensuring secure and reliable operation.
- Customizable Configuration: Lockers can be configured to accommodate products of various sizes and quantities.
- Integrated Control System: Easily pairs with AMS vending machine controllers for seamless operation.
- Remote Monitoring Capabilities: Optional connectivity for real-time performance tracking.
Installation
Placement Guidelines
- Install on a level, stable surface.
- Ensure at least 6 inches of clearance at the back for ventilation.
- Secure the machine with mounting brackets if installed in high-traffic areas.
Electrical Connection
- Connect the KLx Locker to a 115V or 230V power source.
- Use a dedicated circuit with proper grounding to ensure safety.
Initial Setup
- Power on the control unit and verify that all lockers unlock and lock during diagnostics.
- Configure locker numbers and assign products using the control panel.
- Test functionality by performing mock transactions.
Operation
Loading Products
- Open the locker compartments via the control panel or service key.
- Place products securely within the assigned compartments.
- Close and lock the compartments, ensuring the latch engages fully.
Customer Interaction
- Customers select products using the connected vending machine interface.
- Once payment is processed, the corresponding locker unlocks, allowing product retrieval.
Control Panel Operations
- Access system settings to adjust locker configurations and perform diagnostics.
- Monitor sales and locker status directly from the interface.
Maintenance
Daily Tasks
- Inspect locker doors for proper alignment and locking.
- Wipe down the exterior to maintain cleanliness.
Weekly Tasks
- Test all lockers for consistent opening and closing.
- Ensure the control panel is functioning correctly.
Monthly Tasks
- Clean and lubricate locking mechanisms to prevent wear.
- Inspect electrical connections for damage or corrosion.
Troubleshooting
| Issue | Possible Cause | Solution |
| Locker not unlocking | Faulty solenoid or wiring issue | Replace solenoid or check wiring connections. |
| Locker not locking | Misaligned latch or obstruction | Adjust latch alignment; clear obstruction. |
| Control panel not responding | Power or communication failure | Verify power supply and system connections. |
| Locker not recognizing input | Software or sensor issue | Reset control unit; update firmware if needed. |
Contact Information
For technical support, sales, and customer service, contact:
- Phone: 304.725.6921
- Fax: 304.725.6983
- Email: [email protected]
For additional resources, visit the AMS Manuals Page.
For immediate assistance, contact AMS Customer Support using the details above.