Illustrated Parts Guide for AMS KLA9 Locker Vending Machine

Introduction

The AMS KLA9 Locker is a reliable and durable vending solution for managing large or specialty items. This guide highlights the components, their functions, and replacement procedures, ensuring smooth operations and extended machine life.

Specifications

Key Features

1. Modular Locker Design: Configurable compartments to accommodate different product dimensions.
2. Robust Locking System: Electronic locks for secure and reliable operation.
3. Durable Construction: Heavy-duty materials ensure long-term usability.
4. Easy Maintenance: Designed for straightforward part replacement and service.

Parts Identification

The KLA9 Locker consists of the following primary assemblies and components:

1. Locker Cabinet Assembly

• Locker Frame: Provides the structural integrity for the compartments.
• Locker Door: Secured with electronic locks and designed for durability.

2. Electronic Locking Mechanisms

• Solenoids: Control the locking and unlocking of compartments.
• Lock Latch Assemblies: Ensure secure closure of each locker door.

3. Control Unit Components

• Control Board: Manages locker operations and diagnostics.
• Wiring Harness: Connects electrical components throughout the locker.

4. Power and Connectivity

• Power Supply Unit: Converts electrical input to the required voltage for locker operations.
• Communication Module: Enables connectivity with vending machine controllers.

Assembly and Replacement

Locker Door Replacement

1. Open the main cabinet door using the service key.
2. Disconnect the wiring harness from the damaged locker door.
3. Unscrew the hinge bolts and remove the door.
4. Attach the replacement door and secure with bolts.
5. Reconnect the wiring harness and test functionality.

Electronic Lock Replacement

1. Access the lock mechanism by opening the cabinet panel.
2. Disconnect the solenoid wiring and remove the faulty lock.
3. Install the new lock assembly and reconnect the wiring.
4. Test the lock operation using the control panel.

Control Board Replacement

1. Power down the locker and disconnect it from the power supply.
2. Remove the screws securing the control board.
3. Disconnect all wiring harnesses and replace the board.
4. Reconnect wires, secure the board, and power on the machine to test.

Maintenance Recommendations

Weekly Tasks

• Inspect locker doors and latches for proper alignment and wear.
• Check wiring harnesses for damage or loose connections.

Monthly Tasks

• Clean and lubricate lock mechanisms.
• Test the control board and solenoid functionality.

Annual Tasks

• Perform a full inspection of all mechanical and electrical components.
• Replace worn parts as needed to maintain reliability.

Troubleshooting

Contact Information

For technical support, sales, and customer assistance, contact:

• Phone: 304.725.6921
• Fax: 304.725.6983
• Email: [email protected]

For additional resources, visit the AMS Manuals Page.

For immediate assistance, reach out to AMS Customer Support using the details above.